Time-recording terminal, injection moulding machine or POS system: with an RFID module from GiS, your device reads employee badges, authorises operators and recognises tools, containers or consumables. As a ready-made module for your PCB – or as a complete project with software and electronics production in Germany.
In use at Datafox (time recording), Arburg (injection moulding machines) and Krones (filling plants)
Since 1986
RFID development and manufacturing in Lenningen
17.8 × 35.6 mm
MiniModul B100 for your PCB
Made in Germany
Hardware, software and electronics production from a single source
24 h
Reply to your project enquiry
Benefits
What an RFID reader does for your device
A small reader in the right place turns your device into a system that knows people and parts – for your customers, their IT and your service team.
Read your customers' badges
Your customers already have their cards. Our readers support common technologies: 125 kHz (EM4102, Hitag), MIFARE Classic, DESFire, ISO 15693 and NFC. We clarify which cards are in the field during the feasibility check.
Recognise and authorise operators
Instead of key switches or passwords, operators log in with a card or fob. The machine unlocks only the functions they are trained for and records who changed which setting.
Recognise tools, containers and materials
A transponder in the tool, container or consumable tells the machine what is in place. Mix-ups are caught immediately, and encrypted data protects against counterfeits.
One partner for the whole project
Module, antenna, software and production come from one company. You skip your own RF development and coordinating several service providers – right through to the finished device in series production.
Applications
For manufacturers whose devices need to recognise people and parts
Wherever someone logs in at a device or a part is changed, a reader belongs inside. GiS supplies it as a module with antenna, transponder and interface.
Time recording & data collection terminals
Employees clock in and out with their badge. GiS supplies RFID modules for Datafox time-recording systems and has delivered time recording in production and conveyor environments.
- Time-recording terminals
- Shop-floor data terminals
- Canteen & badge readers
Access & locking systems
Doors, gates, barriers and lockers open only for authorised cards. Delivered for locker locks, KNX building automation and vehicle access control for the German Federal Ministry of Defence, among others.
- Doors & gates
- Locker locks
- Barriers & vehicle access
- KNX
Machine building & operator recognition
The machine knows who is operating it and unlocks only the right functions. In use on Arburg injection moulding machines and on welding machines, construction machinery and climate cabinets.
- Injection moulding
- Welding machines
- Construction machinery
- Start authorisation
Tool, container & part recognition
Transponders in tools, containers or bottles control the process. Krones identifies bottles in its filling plants this way; other customers recognise drill heads, component containers and tools at issue points.
- Tool changes
- Containers
- Tool issue
- Anti-counterfeiting
POS, canteen & dispensing
Staff log in at the till with a fob, guests pay with a prepaid card. In school catering, the reader at the food counter prevents duplicate servings.
- POS systems
- Prepaid cards
- Food counters
- Hotel tills
Fuelling & charging
At fuel dispensers, GiS has implemented operator authorisation with fuelling control. The same principle – present a card, get authorised – applies to charging stations and other dispensing points.
- Fuel dispensers
- Company filling stations
- Charging cards
- Dispensing machines
Also delivered
Test & measurement
Test data is stored directly on the tested device – e.g. for electrical and safety inspections.
Weighing & mixing
Weighing and mixing systems recognise containers and recipes in furniture and food production.
Conveyors & AGVs
Floor transponders and readers control monorail systems and automated guided vehicles.
Second source
Alongside your existing reader supplier – for greater supply security.
Integration
How RFID gets into your device
You develop the device, we supply the recognition – as a tested building block that fits your electronics, your housing and your software.
Modules for your PCB
MiniModul B100 with UART and 3.3 V – plugged in via pin headers, for 125 kHz, 134.2 kHz or 13.56 MHz.
Tailored antennas
Coils and ferrite antennas for deep mounting, PCB antennas for HF, patch antennas for UHF – to suit the front panel, control panel or tool holder.
Interfaces & SDK
UART, RS232, USB (HID or COM) and Ethernet with PoE, with optional relay, buzzer and digital I/O. Plus an SDK for your device software.
Custom variants
External antenna, dual read coils, mounting in control panels – and transponders we programme and personalise for you.
From idea to series production
Check feasibility
Clarify card technology, mounting space, materials and read range.
Samples in your prototype
Test module, antenna and test cards directly in your device.
Adaptation
Antenna, configuration, protocol and data format matched to your system.
Production & support
Tested modules, series supply and technical support from Lenningen.
Ways to work together
- OEM module for embedding
- Reader in a housing
- Second source
- Reader + cards + transponders
All from a single source
One value chain. No interfaces.
At GiS, RFID development, software development and our own electronics production in Germany work under one roof. So we deliver not just the reader module but your entire project – from concept to finished device in series production.
Concept & advice
Clarify requirements, card technology, mounting space and costs together.
Hardware & antenna
Electronics, antenna and housing – designed for your device.
Firmware & software
Firmware, PC software, SDK and integration with your system.
Electronics production
Our own manufacturing in Germany – from samples to series.
Series & support
Transponders programmed, devices tested, support from Lenningen.
Usual: four partners, three hand-overs
- Module supplier
- Design house
- Software agency
- Electronics manufacturer
Every hand-over costs coordination, time and warranty clarity. When a detail changes, everyone has to meet again – and when problems arise, each one looks for the fault with the others.
With GiS: one partner, one contact
Hardware, firmware, software and production happen in the same company. The person who designs the board talks directly to the one who writes the software and to the production team that builds it.
Faster to market
No tenders and hand-overs between service providers.
One responsibility
One partner stands behind hardware, software and quality.
Changes without detours
Board and software adjustments happen in the same team.
Made in Germany
Short distances, supply security and know-how that stays in-house.

Caisley International
EIDgo EG-1
Complete project example
The smartphone becomes an RFID reader
For Caisley, GiS delivered the complete reader – from electronics to production: the EIDgo EG-1 turns a USB-C smartphone into a mobile full-ISO reader for electronic animal identification. Plug in, read, carry on – without a separate handheld and without its own battery. Presented at EuroTier 2026 in Hanover.
- ISO 11784 / 11785
- USB-C
- Android & iOS
- No battery of its own
Delivered from a single source
- Miniature reader electronics
- Firmware for animal transponders
- USB-C interface to the smartphone
- Manufactured in Germany
Products
Modules, readers, transponders and software – from a single source
Readers and transponders come from one company and are matched to each other. That shortens your development and simplifies production approval.
References
Proven in terminals, machines and plants
From time recording to injection moulding machines and filling plants: since 1986, GiS has been bringing RFID technology into other manufacturers' devices – from reader modules to complete products.
Datafox GmbH
Device & machine buildingRFID modules in time-recording systems
Arburg GmbH & Co KG
Device & machine buildingOperator recognition on injection moulding machines
Krones AG
Device & machine buildingBottle identification to control the filling plant
Eisenmann Fördertechnik AG
Device & machine buildingControl of conveyor systems for the automotive industry
German Federal Ministry of Defence
Device & machine buildingTruck identification for vehicle access control
Locker locks · DE / EU
Device & machine buildingRFID readers integrated into locking systems for buildings and fitness
POS systems · DE
Device & machine buildingOperator recognition at tills, prepaid cards in hospitality
Fuel dispensers · FR
Device & machine buildingOperator recognition with authorisation and fuelling control
Test equipment · DE
Device & machine buildingStoring test data directly on the tested device
Richard Wolf GmbH
RFID systems for medical devices (endoscopes)
Ivoclar
RFID systems for dental devices
MSA – Auer GmbH
Identification of fire-brigade equipment
Getting started
Three ways to try RFID in your device
You don't need to be an RFID expert. Tell us which cards or parts your device should recognise – we'll show you how and bring the right samples.
Feasibility check
Send us a drawing, photo, specification or a sample card from your customer. We'll tell you which module, antenna and mounting position fit.
- No obligation
- Assessment of card technology, read range and mounting
- Reply within 24 hours
Samples for your prototype
Module, antenna and test cards for trials in your own lab – matched to your device.
- MiniModul B100, OEM module or 380 series reader
- Matching antenna, cards and transponders
- Commissioning support
Integration workshop
Your development team and our engineers at one table – at your site, in Lenningen or by video.
- Requirements and specification
- Electronics, interface, software
- Roadmap to series production
Request a project
A few details are enough. A solution engineer will get back to you with an initial assessment.
Reply within 24 hours
